STL Volume Calculator — Exact Mesh Volume, Grams & Print Cost

Calculate exact cm³ and mm³ solid volume, surface area, realistic shell-plus-infill gram weight, 1.75 mm filament length, and print cost locally in your browser with our signed-tetrahedron STL volume calculator.

Loading enclosure sample... -- cm³
Assumes STL coordinates in millimeters (mm)
Drop .STL Part to Calculate Exact Volume & Cost
Signed-tetrahedron divergence theorem calculation — 100% private in browser RAM.
Solid Mesh Volume
--
Surface Area
--
Estimated Print Weight
--
Material Cost & Length
--
Bounding box and watertight status will appear here.
100% Local RAM Execution • Zero Cloud File Uploads

How an Online STL Volume Calculator Measures Exact 3D Part Volume

Estimating 3D printing filament consumption by multiplying bounding box length, width, and height (X × Y × Z) wildly overstates material cost because most functional brackets, enclosures, and figurines occupy less than 25% of their outer rectangular envelope. To obtain exact geometric volume directly from a triangle mesh, a true STL volume calculator applies the Signed Tetrahedron Divergence Formula across every facet in the model.

For each triangle (A, B, C) on a closed manifold shell, our engine forms a directed tetrahedron with the coordinate origin (0, 0, 0) and evaluates one-sixth of the scalar triple product A · (B × C) / 6. Front-facing outward triangles add positive volume while back-facing underside triangles subtract the empty space beneath the part, canceling out the origin location completely and yielding exact enclosed solid volume in mm³ and cm³.

Realistic Shell Wall + Infill Weight Estimation (Why Naive Infill Math Fails)

Many basic calculators multiply solid volume directly by the infill percentage (V_solid × 20%). In real FDM slicing, that naive shortcut underestimates filament weight by 40% to 60% because outer perimeters, top solid layers, and bottom solid shells are printed at 100% density regardless of your infill slider!

MeshFixer decomposes your part into two physical regions using both exact solid volume (cm³) and total triangle surface area (cm²):

  1. Solid Outer Shell Volume: Multiplies surface area by your selected perimeter wall thickness (0.8 mm for 2 walls, 1.2 mm for standard 3 walls, or 1.6 mm for heavy 4-wall functional parts) with corner-overlap compensation.
  2. Interior Core Infill Volume: Subtracts the outer shell volume from total solid mesh volume, then multiplies only the remaining interior core by your 10%–100% infill density slider (or keeps 100% solid volume for SLA resin prints).

Standard 3D Printing Filament & Resin Density Reference Table

Material Type Standard Density (g/cm³) 1.75 mm Weight per Meter Common Use Cases
PLA / PLA+ 1.24 g/cm³ ~2.98 g/m Rapid prototypes, aesthetic models, organizers
PETG 1.27 g/cm³ ~3.05 g/m Outdoor brackets, water-resistant mechanical parts
ABS 1.04 g/cm³ ~2.50 g/m High-temp enclosures, Voron printer components
TPU 95A 1.21 g/cm³ ~2.91 g/m Drone bumpers, vibration dampers, flexible seals
Standard SLA Resin 1.15 g/cm³ Vat liquid (mL = cm³) High-detail tabletop miniatures, dental models

Why Watertight Meshes Matter for Accurate Volume Math

Because the signed-tetrahedron integral relies on closed outward-pointing surfaces, missing triangles or flipped face normals create mathematical leaks toward (0, 0, 0) and skew the computed cm³ figure. Our STL volume calculator automatically checks manifold closure on load and alerts you if open boundary edges exist:

  • If a warning appears in the status bar above, run your model through our STL Fixer first to seal open holes and unify normals, then drop the repaired .stl back here for exact volume and cost calculation.
  • Need to quote a batch of customer files quickly? Check overhang support requirements in the STL Checker, shrink oversized scans in the STL Simplifier, or archive ASCII files with the STL Compressor.

Frequently Asked Questions

What measurement units does this STL volume calculator assume?

STL files do not store internal unit metadata, and 99% of 3D printing workflows export 1 STL unit as 1 millimeter (1,000 mm³ = 1 cm³ = 1 mL). If your CAD exported in inches, scale by 25.4 in your CAD exporter first.

How close is the estimated gram weight to Bambu Studio or PrusaSlicer?

Yes. Because real FDM prints always extrude solid outer walls, top layers, and bottom layers even at 15% or 20% infill, combining surface-area shell thickness with interior core infill matches Bambu Studio and PrusaSlicer gram estimates closely—excluding optional external support structures.

How do I calculate liquid resin volume in milliliters (mL) for SLA printing?

For solid MSLA resin prints, select Standard SLA Resin (1.15 g/cm³) and set Shell Wall Thickness to 100% Solid Cast / Resin. Remember that 1 cm³ equals exactly 1 milliliter (mL) of liquid resin before adding support rafts.

Why does the tool warn me when my STL mesh is not watertight?

Open holes or inverted triangle normals break the closed divergence integral. Click over to our free STL Fixer on the homepage to seal holes and unify normals locally before measuring volume.

Maker Notes & Slicer Troubleshooting (0)

Share which CAD exporter or slicer warning brought you here, or report an edge-case mesh topology.